[注意] 部分服装行业将会禁止喷砂工艺

Johnz

‘Call to Action’ Major Step Forward in Efforts to Ban Sandblasting

A ground breaking ‘Call to Action’ designed to ban sandblasting, a hazardous process that can cause illness and even death for workers, was adopted earlier this week by ten leading garment brands and retailers in a meeting with the Global Union Federation for the sector. A number of other companies have expressed interest in signing on to the ban.

The agreement was adopted in Brussels by Aurora Fashions, Bestseller, C&A, Carrefour, Esprit, Hennes & Mauritz AB (H&M), Inditex, Karen Millen, Levi Strauss & Co and New Look.

Says Patrick Itschert, General Secretary of the International Textile, Garment and Leather Workers’ Federation (ITGLWF): “Jeans are one of the most popular items of clothing and a very profitable segment of the market is for ‘distressed’ jeans. The method of choice for giving jeans a faded look is sandblasting, but it is a process which is very damaging to workers’ health. Sandblasting releases dust which, when inhaled, causes scarring in the lungs. This can cause silicosis, an incurable and potentially fatal respiratory disease.

“In the absence of effective government regulation the most effective means of eliminating this harmful process is for brands and retailers collectively to impose a voluntary ban on sandblasting in their global supply chains.

“The signatory companies, all of whom have been tackling the issue of sandblasting individually, recognise the importance of expressing their collective intent. We believe that the Call to Action will be instrumental in generating far-reaching action at different levels, including action on the part of industry and government in producing countries as well as on the part of the EU, the ILO and the WHO.

“We are calling on all brands and retailers that are serious about ending sandblasting in the industry to sign the agreement”, concludes Mr. Itschert.

The Call to Action calls on signatory companies to:

Ban the practice of sandblasting throughout their supply chains including but not limited to the use of aluminium oxide, aluminium silicate, silicon carbide, copper slag and garnet for abrasive blasting;

Work with their suppliers in a transition towards alternative methods, after having established the risks and their means of control;

Take the necessary measures to ensure that the ban is effectively applied throughout their whole supply chain.

Signatories to the call to action

Aurora Fashion, Bestseller (coast, Oasis, Warehouse) C&A, Carrefour, Esprit

Hennes & Mauritz AB (H&M), Inditex (ZARA, Pull and Bear, Bershka, Massimo Dutti, Stradivarious, Uterque, Oysho)

Karen Millen, Levi Strauss & Co, New Look

·        

 

·        

 

Date: 24 May 2011

 

谭顺元

笔挺亮丽的服饰背后，有多少工人冒着患尘肺病的威胁为之操劳？

chuhanchen

QUOTE:

以下是引用Johnz在2011-06-02 12:36:57的发言：
楼上的牛x着呢，一下拿了这么多资料出来。

嘿嘿。有问题，找百度。

Johnz

楼上的牛x着呢，一下拿了这么多资料出来。

chuhanchen

话说去稍微了解了一下服装行业喷砂工艺的有关资料，对于同样不是太了解的人，与大家分享如下：

——————————————————

喷砂的主要应用范围：（来自百度百科：http://baike.baidu.com/view/169823.htm）

五）光饰作用对于某些特殊用途工件，喷砂可随意实现不同的反光或亚光。如不锈钢工件、塑胶的打磨，玉器的磨光，木制家具表面亚光化，磨砂玻璃表面的花纹图案，以及布料表面的毛化加工等。

————————

什么是牛仔喷砂工艺？（来自百度：http://zhidao.baidu.com/question/60824698.html）

牛仔裤喷砂是利用压缩空气为动力,将棕刚玉砂喷射到牛仔裤上,能使牛仔裤起到粗化、发白效果,

采用摸板喷砂还能产生猫眉纹效果。

————————————

以下是实拍牛仔裤喷砂过程（手工操作，非机械批量生产）

————————————

图例：（最普通常见的简约风格，仍是经喷砂工艺处理过的）

[upload=jpg]forum/2011-06/1306985857853629.jpg[/upload]

——————————————

真相啊。。。。。。

这样的东东走着的、挂着的。。。。。。满大街都是啊

——————————————

真的很想知道到底会用什么工艺来取代喷砂工艺.。。。。。。

[此帖子已经被作者于[lastedittime]1306986486[/lastedittime]编辑过]

Johnz

QUOTE:

以下是引用若我安可在2011-06-02 01:59:02的发言：
喷砂工艺处理出来的漂亮牛仔裤，同学们，还要穿么？

安可衣柜里有多少件牛仔是喷沙处理过的？！呵呵

Johnz

QUOTE:

以下是引用谭顺元在2011-06-02 08:48:10的发言：

服装行业使用喷砂工艺，目的是为了美化服装面料，提高服装档次。

此工艺生产过程中必须要使用空压机，作业中必然产生大量碎末灰尘，如果作业场所通风除尘效果不好或操作工作个人防护用品使用不当，可能诱发尘肺病。

另外，这些职业病一般是无法医治的。这才是重点。

Blues

QUOTE:

以下是引用chuhanchen在2011-06-02 09:19:35的发言：

道理是不错的。

可是，在一切未得以在阳光下公开，在消费者不知情或根本不关注时，焉知，我们身上从上到下，吃的、用的、穿的，到底有几家制造商的生产过程是符合环保要求的？——特别是在国内，在政府都是睁一眼闭一眼、甚至是完全闭眼的监督、执法条件下？

现在的人过得太复杂太累了。

chuhanchen

QUOTE:

以下是引用Blues在2011-06-02 08:22:41的发言：

我对漂不漂亮没有太大的概念，如果不环保，那无所谓穿了。

道理是不错的。

可是，在一切未得以在阳光下公开，在消费者不知情或根本不关注时，焉知，我们身上从上到下，吃的、用的、穿的，到底有几家制造商的生产过程是符合环保要求的？——特别是在国内，在政府都是睁一眼闭一眼、甚至是完全闭眼的监督、执法条件下？

谭顺元

服装行业使用喷砂工艺，目的是为了美化服装面料，提高服装档次。

此工艺生产过程中必须要使用空压机，作业中必然产生大量碎末灰尘，如果作业场所通风除尘效果不好或操作工作个人防护用品使用不当，可能诱发尘肺病。